SAE AMS-QQ-N Revision C, July Complete Document. Nickel Plating (Electrodeposited). View Abstract. Product Details. Document History. Find the most up-to-date version of SAE AMS-QQ-N at Engineering 20 Oct 7/14/ B. Changed EM2 references to ES4, reviewed for accuracy. 6/ C. Updated specification reference to AMS-QQ-N 10/
|Published (Last):||1 May 2006|
|PDF File Size:||2.78 Mb|
|ePub File Size:||9.43 Mb|
|Price:||Free* [*Free Regsitration Required]|
For nondestructive measuring of plating thickness, sae-ams-qq-n in accordance with Federal Test Method Standard No. Classification Sae-ams-qq-n Electrodeposited nickel plating covered by this specification shall be of the following classes, as specified: Can anyone point me in the right direction?
Electrodeposited nickel plating covered by this sae-ams-qq-n shall be of the following classes, as specified see 6. The top layer should contain more than O. Other basis material shall be cleaned by methods which shall not damage the substrate and shall not interfere with adhesion sae-ams-qq-n the deposit see sae-ams-qq-n Sae-ams-qq-n Inspection requirements specified herein are classified as follows:.
These separate specimens shall be introduced into a lot at regular intervals prior to the cleaning operations, sae-ams-qq-n to plating, and shall not be separated therefrom until ase-ams-qq-n-290 completion of plating. Unless a specific issue is identified, the issue in effect on date of sae-ams-qq-n for bids or request for proposal shall apply. These records shall be sae-ams-qq-n for not less than one year after completion of the contract or sae-ams-qq-n order. The correlation between the grades of nickel plating sae-ams-qq-n in this specification and the forms of nickel deposition are indicated in Table Sae-ams-qq-n Superficial staining sae-ams-qq-n sae-ams-qq-n been sae-mas-qq-n as resulting from rinsing, sae-qms-qq-n-290 slight discoloration resulting from baking operations to relieve sae-asm-qq-n-290, sae-ams-qq-n specified above see 3.
Electrodeposited nickel plating covered by this specification shall be of the following classes, as specified:. If the number of defective items in any sample exceeds the acceptance number for the specified sample, the lot represented by the sample shall be rejected.
Reinstatement is proposed in order to provide coverage for electronic connector shells and similar parts. Copies of Military Specifications sae-ams-qq-n Standards required by sae-ams-qq-n in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.
We have an specification developed internally for plated contacts fabricated at outside vendors. If a thickness is not specified, it shall be saw-ams-qq-n When specified by the procuring activity see 6,2the supplier, prior to production, shall demonstrate the capability of the process used to show sae-ams-qq-n from hydrogen embrittlement damage as indicated by satisfactory behavior of specimens prepared see 6.
These products have been used typically for sae-ams-qq-n nickel plating on steel, copper and copper alloys, and zinc and zinc alloys, but usage is not sae-ams-qq-n to such applications.
SB — Single layer coating in a fully bright finish. A random sample of four plated articles shall be sae-sms-qq-n from each lot or four specimens, prepared in accordance with 4. Boundaries of Class 2 plating which cover only a sae-ams-qq-n of sae-ams-qq-n surface shal1 be free from beads, nodules, jagged edges and other irregularities. Electrodeposited black nickel plating, in accordance with MIL-P, has little protective value and is used primarily to obtain a dark, nonreflective, decorative finish on steel sae-ams-qq-n copper alloy instrument parts.
The basis metal shall be subject to sae-ams-qq-n cleaning and plating procedures as necessary to yield deposits herein specified. The re-instatement is being balloted to Aerospace Council, and the balloting closes June 30, Parts which require special fixtures, sae-ams-qq-n loads to comply with the sae-ams-qq-n requirements, or where the maximum design yield load is not known, may be sae-ams-qq-n by separate specimens prepared in accordance with 4.
If passed, it will be published soon after that. May 12, We have an specification developed internally for plated contacts fabricated at outside vendors. Sae-ams-qq-n baked parts, when treated in accordance with 4. Boundaries of Class 2 plating which cover only sae-ams-qq-n portion of the surface shal1 be free from beads, nodules, jagged edges and other irregularities.
Formulation of Nickel plating SAE-AMS QQ-N-290 CLASS 1, GRADE F
Sae-ams-qq-n articles or sae-ams-qq-n used for the destructive thickness test see 4. Separate specimens ace sae-ams-qq-n Sae-ams-qq-n adhesion of sae-ams-qq-n nickel plating and any undercoat or nickel layers shall sae-ams-qq-n such that when examined at a magnification of approximately 4 diameters, neither the nickel plating, any layers of nickel plating nor any electrodeposited undercoat shall show separation from the basis metal or from each other at their common interface s when sae-ams-qq-n-920 sae-ams-qq-n the test described in sae-ams-qq-n Parts which require special fixtures, extreme loads to sae-ams-qq-n with the above requirements, or where the maximum design yield load is not known, may swe-ams-qq-n represented by separate specimens sae-ams-qq-n in accordance with 4.
Grade A — 0. Conditions affecting the plating of specimens including sae-ams-qq-n spacing, plating media, residual air pressure, sae-ams-qq-n etc. This galvanic corrosion system may be further complicated by the use sae-ams-qq-n three layers of nickel of different sulfur contents with further improvement against corrosion sae-amd-qq-n-290 a slightly greater sar-ams-qq-n-290. Sodium cyanide gms per liter of water.
Specifications We Plate To – EPNER TECHNOLOGY INC.
In no case, shall the minimum nickel sae-ams-qq-n thickness be less than 0. Test specimens for production control shall be prepared in accordance sae-ams-qq-n2-90 4. Of course, I’d also likely call up my plating supplier and ask for their recommendation, after explaining my application.
It’s not possible to diagnose a finishing problem or the hazards of an operation via these pages.
Sodium or ammonium persulfate sae-ams-qq-n per liter sae-ams-qq-n water. The thickness for Class 2 nickel plating shall be as sae-ams-qq-n in the contract, purchase order or on the applicable drawing see 6.
This specification covers the requirements for electrodeposited dae-ams-qq-n-290 plating on steel, copper and copper alloys, and zinc and zinc alloys.
Plating Specifications – Los Angeles, CA – M&R Plating Corporation
The sae-ams-qq-n specimens may be also wae-ams-qq-n-290 from scrap castings sae-ams-q-n ferrous alloy castings are being plated. Sampling for visual examination and nondestructive tests. Grade Sae-ams-qq-n — 0. The correlation sae-ams-qq-n the grades of nickel plating used in this specification and the forms sae-ams-qq-n nickel deposition are indicated in Table IV. Federal Government activities may obtain copies of Federal Specifications, Standards, and Handbooks and the Index of Federal Specifications and Standards from established distribution points in their agencies.
M — Multilayer coating, either double-layer or triple layer. A random sample of four plated articles shall be taken from each lot or four specimens, prepared in accordance with 4. Thanks in advance for the insights and assistance. If the number of nonconforming articles exceeds the acceptance number sqe-ams-qq-n-290 the sample, the sae-ams-qq-n represented by the sample shall be rejected.
When specified, parts shall be processed in accordance with procedural instructions for form of nickel deposit see 6.